
Roundtable on Sustainable Palm Oil (RSPO) - Supply Chain
We are a not-for-profit that unites stakeholders from the 7 sectors of the palm oil industry: oil palm producers, processors or traders, consumer goods manufacturers, retailers, banks/investors, and environmental and social non-governmental organisations (NGOs), to develop and implement global standards for sustainable palm oil. The RSPO has developed a set of environmental and social criteria which companies must comply with in order to produce Certified Sustainable Palm Oil (CSPO). When they are properly applied, these criteria can help to minimize the negative impact of palm oil cultivation on the environment and communities in palm oil-producing regions.
Which ESG topics does the data source address?
Below you find the impact areas within the Responsibly Impact Parameter Framework which are covered by this data source.
Workplace systems and procedures
Social impact parameter
4. Accreditation Requirements: Model for Approval and Monitoring of Third Party Certification Bodies
4.1 Accreditation overview
4.2 Accreditation Body (AB) requirements
4.3 Suspension, withdrawal and termination of accreditation
4.4 Accreditation requirements for certification bodies
Annex 3 - Supply Chain Group Certification Scheme
The Group Manager shall define the geographic area, the number and identity of the group members, the supply chain model, and the types of operation covered by the scope of the group certification scheme.
7. Training :
As part of the ICS, the Group Manager shall establish and implement training for scheme members to cover all applicable requirements of the RSPO Chain of Custody.
9. Internal Audits
The Group Manager shall conduct at least annual internal audits of each participating site to ensure compliance with the group scheme of Supply Chain Certification Standard
requirements.
Annex 2 - Multi- Site Certification
1. Explanation:
The organisation shall define the geographic area, the number and identity of sites, the supply chain model and the types of operations covered by the scope of their multi-site chain of
custody system. (Note: Mass Balance accounting can only be implemented at site level)
5. Internal Audits:
The Central Office shall conduct at least annual internal audits of each participating site to determine whether the supply chain certification system:
a) Conforms to the planned arrangements, the requirements of the RSPO Supply Chain Certification Standard, and the RSPO Rules on Market Communications and Claims, and any other requirements established by the organisation;
b) Is effectively implemented and maintained.
5. General Chain of Custody Requirements for the Supply Chain
5.13 Management review
5.13.1 The organisation shall conduct annual management reviews at planned intervals, appropriate to the scale and nature of the activities undertaken.
5.13.2 The input to management review shall include information on:
a) Follow-up actions from previous management reviews.
b) Results of internal audits covering RSPO Supply Chain Certification Standard.
c) Stakeholders’ feedback.
d) Status of preventive and corrective actions.
e) Changes that could affect the management system.
f) Recommendations for improvement
5.13.3 The output from the management review shall include any decisions and actions related to:
a) Improvement of the effectiveness of the management system and its processes.
b) Resources needed for effective implementation of the system.
Product safety
Social impact parameter
Annex 7 - Guidance for RSPO Supply Chain Certification of Food Service Company/Companies
Raw material efficiency
Environmental impact parameter
Annex 6 - RSPO Rules for Oleochemicals and Its Derivatives
This Annex is complementary to the Module A/B/C of the RSPO Supply Chain Certification Standard (SCCS) aiming to increase transparency for oleochemicals and its derivatives.
Supplier environmental assessments
Supplier management parameter
6. Supply chain models - modular requirements
1. Definition
The following section of the standard sets out the RSPO Supply Chain Models, presented separately as Modules A to C. An organisation shall implement at least one, or a combination of the modules in addition to the General Chain of Custody Requirements for the Supply Chain.
The following modules are currently available:
Module A – Identity Preserved (IP)
The Identity Preserved (IP) supply chain model assures that the RSPO certified oil palm product delivered to the end user is uniquely identifiable to a single RSPO certified IP mill. All supply chain participants shall ensure that the RSPO certified oil palm product is kept physically isolated from all other oil palm sources throughout the supply chain (including other RSPO CSPO sources).
Module B – Segregated (SG)
The Segregated approach requires that the RSPO certified oil palm products are kept separate from non-RSPO certified oil palm products at every stage of production, processing, refining, and manufacturing throughout the supply chain. This model allows mixing of any RSPO IP and/or SG certified oil palm products from various certified sources. Physical certified oil palmproducts delivered to the end user will be traceable to a list of RSPO certified mills.
Module C – Mass Balance (MB)
The Mass Balance (MB) supply chain model administratively monitors the trade of RSPO certified oil palm products throughout the entire supply chain, as a driver for mainstream trade in RSPO certified oil palm products. MB can only be operated at site level (mass balance claims cannot be transferred from site to site).
2. Supply chain requirements
Module A: The site shall ensure that the RSPO IP oil palm product is kept physically isolated from all other palm oil sources and is uniquely identifiable to a single RSPO certified mill and its certified supply base.
Module B: The Segregated approach requires that the RSPO certified oil palm products are kept separate from non-RSPO certified oil palm products at every stage of production, processing, refining, and manufacturing throughout the supply chain. This model allows mixing of any RSPO IP and/or SG certified oil palm products from various certified sources. Physical certified oil palm products delivered to the end user will be traceable to a list of RSPO certified mills.
Module C: The basis of the supply chain requirements for Mass Balance shall consist of reconciliation between the quantity of RSPO certified oil palm products bought and the quantity of RSPO certified oil palm products sold. This includes control of purchases and sales of RSPO certified
oil palm products and its derivatives, which shall be independently verified. There are no requirements for separate storage, transportation, or controls in the production process.
3. Processing
Module A: The site shall assure and verify through documented procedures and record keeping that the
RSPO certified oil palm product is kept separate from non-certified oil palm products and oil palm products from other certified mills, including during transport and storage to strive for 100% separation.
Module B: The site shall assure and verify through clear procedures and record keeping that the RSPO certified oil palm product is kept segregated from non-certified oil palm products including during transport and storage to strive for 100% separation.
Module C: The site shall ensure that the quantity of physical RSPO Mass Balance oil palm product inputs
and outputs (volume or weight) at the physical site are monitored.
4. Accounting system C
Continuous Accounting Systems
Fixed Inventory Periods
C 5. Conversion ratios
All volumes of palm oil and palm kernel oil fractions and derivatives that are delivered are deducted from the material accounting system according to the conversion ratios set out by RSPO (see section 5.10), with the exception of the option detailed in C.5.3.
C.5.3 Sites can purchase a certain volume or weight of Identity Preserved (IP) or Segregated (SG) RSPO certified palm oil and palm kernel products and use it to match the sales of equal volumes of oil palm product derivatives that then carry a Mass Balance claim without requiring a physical or chemical link between the acquired Identity Preserved or Segregated product and the derivative that is sold under Mass Balance (see Figure 1). The conversion from Identity Preserved or Segregated products to Mass Balance is allowed upwards, sideways, and downwards in the same product tree.
5. General Chain of Custody Requirements for the Supply Chain
5.1 Applicability of the general chain of custody requirements for the supply chain:
Either the operator at site level or its parent company seeking certification shall be a member of the RSPO and shall register on the RSPO IT platform.
5.2 Supply Chain model:
The site can only use the same supply chain model as its supplier or go to a less strict system in the following order: Identity Preserved -> Segregated -> Mass Balance.
5.3 Documented procedures:
The site shall have written procedures and/or work instructions or equivalent to ensure the implementation of all elements of the applicable supply chain model specified.
5.4 Purchasing and goods in:
The receiving site shall ensure that the purchases of RSPO certified oil palm products are in compliance (checking the valid Supply Chain licence of the supplier to trade the products as RSPO certified products).
5.5 Outsourcing activities:
In cases where an operation seeking or holding certification outsources its activities to independent third parties (e.g. subcontractors for storage, transport, or other outsourced
activities), the operation seeking or holding certification shall ensure that the independent third party complies with the requirements of the RSPO Supply Chain Certification Standard.
5.6 Sales and goods out:
The supplying site shall ensure that the following minimum information for RSPO certified products is made available in document form:
a) The name and address of the buyer
b) The name and address of the seller
c) The loading or shipment / delivery date
d) The date on which the documents were issued
e) A description of the product, including the applicable supply chain model (Identity Preserved, Segregated, Mass Balance, or the approved abbreviations)
f) The quantity of the products delivered
g) Any related transport documentation
h) Supply Chain Certificate number of the seller
i) A unique identification number(s).
5.7 Registration and transactions:
Supply chain actors who:
a) Are mills, traders, crushers, and refineries
b) Take legal ownership and/or physically handle RSPO certified sustainable oil palm products that are available in the yield scheme of the RSPO IT Platform (Figure 2 and Figure 3, Annex 1) shall register their transaction in the RSPO IT platform and confirm upon receipt where applicable.
5.9 Record Keeping:
The organisation shall maintain accurate, complete, up-to-date, and accessible records and reports covering all aspects of these RSPO Supply Chain Certification Standard requirements.
5.10 Conversion factors:
Where applicable a conversion rate shall be applied to provide a reliable estimate for the amount of certified output available from the associated inputs. Organisations may determine and set their own conversion rates which shall be based upon past experience, documented, and applied consistently. Guidance on conversion rates is available in the RSPO Rules for Oleochemicals and its Derivatives. This is relevant for derivatives of Palm Oil and Palm Kernel Oil, as used in the oleochemical and personal care industries.
5.11 Claims:
The site shall only make claims regarding the use of or support of RSPO certified oil palm products that are in compliance with the RSPO Rules on Market Communications and Claims.
5.12 Complaints:
The organisation shall establish and maintain documented procedures for receiving and resolving stakeholder complaints.
Supply chain traceability
Supplier management parameter
3. Certification Standards
3.1 Sustainable production of palm oil products
3.2 Supply Chain requirements for sustainable oil palm products
Annex 5 - RSPO Supply Chain Certification for Micro Users
Palm oil micro users is an organisation that use a very low volume of oil palm products, i.e. less than 1000 kg of oil palm products per annum. This is the total volume of all oil palm products (certified and non-certified).
Micro users that would like to make use of this reduced audit regime have two options; individual supply chain certification or group certification.
Annex 4 - Book and Claim (BC)
The ‘Book and Claim’ (BC) supply chain model allows RSPO certified mills, crushers, independent outgrowers, and independent smallholder groups to sell RSPO Credits to the supply chain actors at the end of the supply chain, while selling the physical oil palm products as non-certified/ conventional.
6. Supply chain models - modular requirements
1. Definition
The following section of the standard sets out the RSPO Supply Chain Models, presented separately as Modules A to C. An organisation shall implement at least one, or a combination of the modules in addition to the General Chain of Custody Requirements for the Supply Chain.
The following modules are currently available:
Module A – Identity Preserved (IP)
The Identity Preserved (IP) supply chain model assures that the RSPO certified oil palm product delivered to the end user is uniquely identifiable to a single RSPO certified IP mill. All supply chain participants shall ensure that the RSPO certified oil palm product is kept physically isolated from all other oil palm sources throughout the supply chain (including other RSPO CSPO sources).
Module B – Segregated (SG)
The Segregated approach requires that the RSPO certified oil palm products are kept separate from non-RSPO certified oil palm products at every stage of production, processing, refining, and manufacturing throughout the supply chain. This model allows mixing of any RSPO IP and/or SG certified oil palm products from various certified sources. Physical certified oil palmproducts delivered to the end user will be traceable to a list of RSPO certified mills.
Module C – Mass Balance (MB)
The Mass Balance (MB) supply chain model administratively monitors the trade of RSPO certified oil palm products throughout the entire supply chain, as a driver for mainstream trade in RSPO certified oil palm products. MB can only be operated at site level (mass balance claims cannot be transferred from site to site).
2. Supply chain requirements
Module A: The site shall ensure that the RSPO IP oil palm product is kept physically isolated from all other palm oil sources and is uniquely identifiable to a single RSPO certified mill and its certified supply base.
Module B: The Segregated approach requires that the RSPO certified oil palm products are kept separate from non-RSPO certified oil palm products at every stage of production, processing, refining, and manufacturing throughout the supply chain. This model allows mixing of any RSPO IP and/or SG certified oil palm products from various certified sources. Physical certified oil palm products delivered to the end user will be traceable to a list of RSPO certified mills.
Module C: The basis of the supply chain requirements for Mass Balance shall consist of reconciliation between the quantity of RSPO certified oil palm products bought and the quantity of RSPO certified oil palm products sold. This includes control of purchases and sales of RSPO certified
oil palm products and its derivatives, which shall be independently verified. There are no requirements for separate storage, transportation, or controls in the production process.
3. Processing
Module A: The site shall assure and verify through documented procedures and record keeping that the
RSPO certified oil palm product is kept separate from non-certified oil palm products and oil palm products from other certified mills, including during transport and storage to strive for 100% separation.
Module B: The site shall assure and verify through clear procedures and record keeping that the RSPO certified oil palm product is kept segregated from non-certified oil palm products including during transport and storage to strive for 100% separation.
Module C: The site shall ensure that the quantity of physical RSPO Mass Balance oil palm product inputs
and outputs (volume or weight) at the physical site are monitored.
4. Accounting system C
Continuous Accounting Systems
Fixed Inventory Periods
C 5. Conversion ratios
All volumes of palm oil and palm kernel oil fractions and derivatives that are delivered are deducted from the material accounting system according to the conversion ratios set out by RSPO (see section 5.10), with the exception of the option detailed in C.5.3.
C.5.3 Sites can purchase a certain volume or weight of Identity Preserved (IP) or Segregated (SG) RSPO certified palm oil and palm kernel products and use it to match the sales of equal volumes of oil palm product derivatives that then carry a Mass Balance claim without requiring a physical or chemical link between the acquired Identity Preserved or Segregated product and the derivative that is sold under Mass Balance (see Figure 1). The conversion from Identity Preserved or Segregated products to Mass Balance is allowed upwards, sideways, and downwards in the same product tree.
5. General Chain of Custody Requirements for the Supply Chain
5.1 Applicability of the general chain of custody requirements for the supply chain:
Either the operator at site level or its parent company seeking certification shall be a member of the RSPO and shall register on the RSPO IT platform.
5.2 Supply Chain model:
The site can only use the same supply chain model as its supplier or go to a less strict system in the following order: Identity Preserved -> Segregated -> Mass Balance.
5.3 Documented procedures:
The site shall have written procedures and/or work instructions or equivalent to ensure the implementation of all elements of the applicable supply chain model specified.
5.4 Purchasing and goods in:
The receiving site shall ensure that the purchases of RSPO certified oil palm products are in compliance (checking the valid Supply Chain licence of the supplier to trade the products as RSPO certified products).
5.5 Outsourcing activities:
In cases where an operation seeking or holding certification outsources its activities to independent third parties (e.g. subcontractors for storage, transport, or other outsourced
activities), the operation seeking or holding certification shall ensure that the independent third party complies with the requirements of the RSPO Supply Chain Certification Standard.
5.6 Sales and goods out:
The supplying site shall ensure that the following minimum information for RSPO certified products is made available in document form:
a) The name and address of the buyer
b) The name and address of the seller
c) The loading or shipment / delivery date
d) The date on which the documents were issued
e) A description of the product, including the applicable supply chain model (Identity Preserved, Segregated, Mass Balance, or the approved abbreviations)
f) The quantity of the products delivered
g) Any related transport documentation
h) Supply Chain Certificate number of the seller
i) A unique identification number(s).
5.7 Registration and transactions:
Supply chain actors who:
a) Are mills, traders, crushers, and refineries
b) Take legal ownership and/or physically handle RSPO certified sustainable oil palm products that are available in the yield scheme of the RSPO IT Platform (Figure 2 and Figure 3, Annex 1) shall register their transaction in the RSPO IT platform and confirm upon receipt where applicable.
5.9 Record Keeping:
The organisation shall maintain accurate, complete, up-to-date, and accessible records and reports covering all aspects of these RSPO Supply Chain Certification Standard requirements.
5.10 Conversion factors:
Where applicable a conversion rate shall be applied to provide a reliable estimate for the amount of certified output available from the associated inputs. Organisations may determine and set their own conversion rates which shall be based upon past experience, documented, and applied consistently. Guidance on conversion rates is available in the RSPO Rules for Oleochemicals and its Derivatives. This is relevant for derivatives of Palm Oil and Palm Kernel Oil, as used in the oleochemical and personal care industries.
5.11 Claims:
The site shall only make claims regarding the use of or support of RSPO certified oil palm products that are in compliance with the RSPO Rules on Market Communications and Claims.
5.12 Complaints:
The organisation shall establish and maintain documented procedures for receiving and resolving stakeholder complaints.
Supplier education and training
Supplier management parameter
Annex 3 - Supply Chain Group Certification Scheme
The Group Manager shall define the geographic area, the number and identity of the group members, the supply chain model, and the types of operation covered by the scope of the group certification scheme.
7. Training :
As part of the ICS, the Group Manager shall establish and implement training for scheme members to cover all applicable requirements of the RSPO Chain of Custody.
9. Internal Audits
The Group Manager shall conduct at least annual internal audits of each participating site to ensure compliance with the group scheme of Supply Chain Certification Standard
requirements.
Annex 2 - Multi- Site Certification
3. Training:
As part of the ICS, the Central Office shall establish and implement training for participating sites to cover all applicable requirements of the RSPO multi-site chain of custody.
5. General Chain of Custody Requirements for the Supply Chain
5.8 Training:
The organisation shall have a training plan on RSPO Supply Chain Standards requirements, which is subject to annual review and is supported by records of the training provided to staff.
Supplier human rights assessments
Supplier management parameter
Annex 3 - Supply Chain Group Certification Scheme
The Group Manager shall define the geographic area, the number and identity of the group members, the supply chain model, and the types of operation covered by the scope of the group certification scheme.
7. Training :
As part of the ICS, the Group Manager shall establish and implement training for scheme members to cover all applicable requirements of the RSPO Chain of Custody.
9. Internal Audits
The Group Manager shall conduct at least annual internal audits of each participating site to ensure compliance with the group scheme of Supply Chain Certification Standard
requirements.
Annex 5 - RSPO Supply Chain Certification for Micro Users
Palm oil micro users is an organisation that use a very low volume of oil palm products, i.e. less than 1000 kg of oil palm products per annum. This is the total volume of all oil palm products (certified and non-certified).
Micro users that would like to make use of this reduced audit regime have two options; individual supply chain certification or group certification.